building my own GameFrame :)

Home › Forums › Game Frame › Hardware Modding › building my own GameFrame :)

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 28, 2015 at 10:23 pm #2113
    philipp.herfurth
    Participant

    Hey everyone,
    i´m about to build my own gameframe.
    I have built 16×16 ws2812 matrix and run some animations on the matrix via gladiator.

    now I want to add the animations from sd card function but I never worked with sd cards in combination with arduino :/

    Can I use a Arduino nano (or uno) and some data locker shields?
    In the Top of the gameframe firmware there is a line called “Chip select line for SD card”. How Do I know which number I have to Pick?

    Thanks for your time 🙂

    January 3, 2016 at 4:15 am #2120
    Jeremy Williams
    Keymaster

    Any Uno shield with SD should work. Take a look at the example code that ships with the shield and see what the Chip Select pin is.

    January 18, 2016 at 4:38 pm #2151
    philipp.herfurth
    Participant

    Now i have another Question.
    How is the wiring of the data line done?
    From left to right? like a snake left right -> right left -> left right..)?

    And on which pins are The buttons connected? Are they NO or NC? 🙂

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Hardware Modding’ is closed to new topics and replies.