[jamesbovey333]

Thanks Jeremy. Yes I have ordered and received the exact sd module from adafruit and also have the rtc module you suggested so I’m hoping it will all go together easily. I have some momentary buttons so planning to use them. Hopefully LEDs should arrive this week and I can get on with this 🙂 will purchase sd files ready. Thanks for all the help sir.

[jamesbovey333]

Thanks for the reply Jeremy, yes I managed to get the script compiled in the end, I messed up with the adafruit library and used the wrong one! Just waiting for the rest of my LED strips before I can put it all together. Not entirely confident on the wiring of sd module, buttons and rtc but I’m guessing it’s the same as in adafruit tutorials for those modules. I see you have used pins 4/5 for buttons and pin 9 for cs on sd module. Do I need resistors for those or do they use resistors onboard? And do I need specific buttons for this? Sorry for all the questions, relatively new to programming and electronics so apologies if my questions are really simple. Once powered, and with game sketch loaded onto arduino, will the matrix display anything before I push in the loaded sd card. Many thanks for your support, genuinely appreciate it greatly

[jamesbovey333]

Ok, so I have got past that error but now it’s saying my sketch is too big. The clock sketch fits fine but not the game sketch. Am using Jeremy’s link to adafruit library as in a previous post someone was having the same issues but it’s still saying it’s too big 🙁 please help

[Author]

Posts